How To Clean Travertine Pavers
Especially when it comes to pool and patio pavers, travertine are often seen as an ideal flooring option. Due to its heat resistance, slip resistance, and apparent beauty, this material is popular with architects, interior designers, pool builders, and paver installers.
The material requires periodic maintenance, especially cleaning. Your investment could be at risk if you do not know how to clean travertine properly.
Even though cleaning travertine isn’t too hard, there is always a risk of damaging the pavers, no matter what method is used. Our article addresses some of the most commonly asked questions about cleaning travertine.
Is there anyone who doesn’t love seeing travertine like these?
Can You Pressure Wash Travertine Paver?
If you install travertine under a tree, you may have to clean the area periodically. Trees generally generate a lot of dirt, releasing leaves and other residues; in such cases, pressure washing the surface is not only the most effective but also the fastest option.
With pressure washing, you’ll be removing more than just dirt. Sealing is a crucial step in the process of installing and maintaining pavers, as we have discussed previously. Sealing your travertine can help protect them and increase their durability and beauty for much longer. Additionally, it can assist in removing residue from travertine , such as tree sap.
.
In addition to speeding up the sealant wear process, pressure washing travertine accelerates it. Therefore, you should always reseal your pavers after pressure washing.
How To Remove Mold From Travertine Pavers
Mold is another type of dirt commonly found in travertine. In many cases, travertine are installed around swimming pools to prevent moisture from finding its way into them. There may be some spots in your travertine that don’t receive enough sunlight, even if they’re not by the pool. It is always possible for mold to form when pavers are exposed to humidity for an extended period of time.
Following these steps is the best way to clean up mold:
1. Use a garden hose to water the area;
2. Prepare a mild soapy or detergent solution in a bucket of hot water;
3. Scrub the pavers with a nonmetallic scrubbing brush dipped in the solution;
4. Repeat step 3 until most of the mold has been removed;
5. Using mild soap or detergent, wash the area with water from the hose to remove the mold and water solution;
6. Re-wet the area with water and a mild soap or detergent solution to remove any remaining mold. Sprinkle talcum powder on the stains to remove them. Wait for the talc to dry on the pavers after absorbing the solution;
7. Rinse the patio with the hose and sweep with the scrubbing brush. Allow the patio to air dry.
Repeat this procedure frequently in areas where mold is likely to form. Even though the process is more complicated and time-consuming, it’s one of the most effective ways to remove mold stains from travertine .
Does Sealing Pavers Help Prevent Mold?
In order to avoid, or at least facilitate, the process above, the sealant should be applied correctly. In addition to preventing mold growth, this application will also prevent the growth of weeds and moss.
Can You Use Bleach On Outdoor Travertine Pavers?
There are several companies that recommend that travertine be cleaned with bleach and ammonia, but we don’t recommend it.Bleach and ammonia have acidic properties, which can damage surfaces over time. Travertine typically show this wear as their appearance becomes dull and aged over time. Although these products are effective in cleaning, they have a high risk of damaging travertine.
Avoid any chemical substance not specifically developed for travertine cleaning, except for neutral soap and dishwasher detergent. This rule also includes elements such as vinegar and citrus fruit-based products, including lemons. If you choose to use any of these substances, especially ammonia or bleach, use them very diluted with water.
.
What Is The Best Cleaner For Travertine?
Generally, the best way to clean travertine pavers is with water and a mild cleaning agent without many chemical components. Cleaning Travertine Pavers with a pressure washer is also acceptable, as long as you reseal them afterward. Regularly cleaning the surface removes most dirt, including spores that can form mold when moisture is present. It is also necessary to remove weeds growing between pavers regularly, but always take care not to damage the surface.
