How to Install Travertine Pavers
Travertine paver is well-known for its durability, and beauty. All of these features make it a popular choice for patios, walkways, driveways, and most importantly, pool decks.
There are many advantages to choosing travertine, especially if you compare them with other types of paving stones, which are natural and do not wither over time.
Most people do not know, but there are many ways to place pavers. In this article, you will find out more about how to install a travertine paver in the step-by-step guide!
How to install travertine pavers?
First, it is really common to make a mistake on travertine with travertine tiles. The main difference is that the pavers are dense and have holes over the tiles;
The installation of travertine may be muddy or dry, so many people wonder which method is best. The best way to install travertine is the dry method, mainly because it works for hot and cold weather conditions and is easy to replace the paver, if necessary.
Before you can start, you will need to do some planning first. Mark the area you want to cover with pegs and, as digging is involved in this process, contact your local company so that you do not hit the cables or pipes.
The installation of travertine pads is very common in pool deck projects
After checking everything, it’s time to grab some resources and tools to start the installation:
• Travertine pads
• Shovel
• Computer of plates
• Rubber mallet
• Crushed limestone (or crushed gravel)
• Sand
• Polymeric sand
• Rope
• Ropes
• Wooden poles
• Measurement tape
• FlexBond
• A stone saw
• Safety equipment
Is it okay? Now follow the steps below!
Step 1: Mark and dig
The first thing you need to do is mark the area you want to cover with strings and wooden poles or spray paint.
Start digging the area. How deep you dig depends on what the project will be. Typically, walkways, sidewalks, or patios require a depth of 4 to 6 inches, while driveways require approximately 12 inches of depth. After digging, cover the soil with a compactor plate.
Step 2: Create a boundary
Use perks to make a border around the perimeter of the area and protect it with FlexBond. If you live in an area with a cold climate, this step is very important because it will prevent damage when the travertine grows and contracts.
Step 3: Add a foundation
After the border is finished, pour 6 to 8 inches of crushed limestone over the excavated area, spread evenly, check the level, and cover the surface. Crushed limestone is highly recommended because it keeps the pavers in place and allows water to flow.
Step 4: Add sand
Pour about 1 to 2 inches of sand over the crushed limestone, spread it evenly, and check the quality again.
Step 3: Install edging stones
Place the planning stones in the sand according to the cycle of your project. Then, adjust the level if necessary. After everything is well balanced, press the pavers on the edge with a rubber mallet.
Step 4: Put the leaves on
Start placing the pavers on the sand bed by following the pattern you have chosen, and make sure that the edges are evenly spaced. If necessary, you can cut the pavers with masonry saws to fit.
Step 5: Apply pavers
After all the pavers have been laid, plow the floor with a plate compactor at least three times in different places to make sure it is well pressed into the sand.
Step 6: Fill in the blanks
Once the pavers are fixed, it is time to use polymeric sand, which is a function that keeps the pavers in place. Sweep the sand in the cracks with a broom and when there is no more sand left on top, water the area with a garden hose to place.
Can I apply travertine sprays myself?
You can, but remember hire a specialist to ensure the quality and longevity of your project. As you have seen in this article, there are many potential ways for a site developer to apply the same principles, and the chances of something going wrong are slim if you do it yourself.
